Black Friday Sale: Click Here

Free Shipping & Returns Learn More 

Best Price Guaranteed Learn More

20,000+ Happy Customers

Holographic Electric Fireplaces: How They Work and Who They Suit

Holographic electric fireplace built into a media cabinet in a living room

A holographic fireplace is an electric fireplace whose flame looks like it rises out of the logs, the way it does in a real fireplace, instead of playing on a screen behind them. Despite the name, it is not a hologram. It is a moving picture of fire, placed in the firebox by a reflection or a projection, so your eye reads it as fire rising from the logs.

This guide explains how the different kinds work, why they look three-dimensional, how the flame compares with LED, virtual and water vapor fireplaces, and what living with one involves. If you would rather start by looking, browse our holographic fireplaces.

Here is what a holographic flame looks like up close, filmed for our channel.

"Holographic" is a name for the effect, not a true hologram

A true hologram is recorded with a laser and rebuilds light from many directions, so the image changes as you walk around it. No fireplace we know of does that, and none of the manufacturers we checked claims to. "Holographic" is the industry's word for a flame that looks like it comes out of the logs rather than off a screen.

The idea behind many of them is a stage trick from the 1800s called Pepper's ghost. A brightly lit image sits out of the audience's sight, and a sheet of clear glass is angled between them and the stage. The audience sees the reflection standing on stage among real props. Swap the ghost for a flame and the stage for a log bed, and you have a holographic fireplace.

The classic design reflects a hidden screen in angled glass

Side-view diagram of a holographic fireplace: a screen in the top of the firebox reflects its flame off angled glass toward the viewer
In a reflection design, a screen in the roof of the firebox plays the flame and angled glass reflects it toward the room.

This is the classic layout. A screen is mounted in the top of the firebox, facing down, out of your line of sight. Below it, a sheet of special glass is angled across the firebox. The glass reflects the screen's flame toward the room, and because the glass is clear you also see the logs through it. The flame appears in among the logs, so it looks like it is rising out of them.

Some manufacturers describe their holographic models in exactly these terms: footage of real flames on a top-mounted LCD screen, reflected in angled glass, with Pepper's ghost named as the source of the idea. Amantii's service guide for the MultiView HOLO draws the same arrangement. Flamerite's manual for the E-Ridium confirms an LCD screen and an inclined glass, and warns that bright rooms create reflections that weaken the flame.

Some project the flame onto the logs or a coated screen

The second approach skips the angled glass. Some manufacturers project video of real fire directly onto a physical log set. Others use a projector that casts the flame onto a specially coated, transparent screen inside the firebox.

Other manufacturers describe their holographic fireplaces as dual-screen or dual-panel projection without saying how the image reaches the logs. If the method matters to you, and it affects viewing angle, ask the manufacturer or watch a video shot from the side.

The depth comes from what surrounds the flame

A flat flame on a back wall always looks like a picture of a fire, however good the picture is. A reflected flame looks different for two reasons. It is see-through, so where there is no flame you see the dark firebox, not a glowing screen. And real logs sit in front of it, so your eye reads the overlap as depth. In projection designs the flame lands on the logs themselves, which does the same job a different way.

The better models add to that with physical detail. Look for logs with lights built into them, a glowing ember bed, downlights, and effects in the footage such as sparks and smoke. Some manufacturers say they use footage of real fires rather than animation. That is worth checking, because movement is what gives a fake flame away first.

How the holographic flame compares with the others

Every electric fireplace makes its flame out of light. What differs is how the flame is made and where your eye thinks the fire is.

Flame type How the flame is made Where the fire appears Light it needs
LED flame effect LEDs and moving reflectors build a flame pattern out of light On a panel at the back of the firebox Varies by model
Virtual A screen behind the logs plays a flame you look at directly, often filmed fire On the screen, behind the logs Varies by model
Holographic A hidden screen's flame is reflected in angled glass, or projected onto the logs or a coated screen Rising out of the logs, with no screen behind it Low to moderate; reflection models warn against bright light and direct sun
Water vapor Fine mist lit from below by LEDs In the air above the logs, with real depth Low light shows it best

Against virtual. The two are close relatives, and many play the same thing: footage of a real fire. The difference is where the screen is. In a virtual fireplace you look straight at it, so the flame reads as a picture at the back of the box. In a holographic one the screen is out of sight, so the flame looks like it rises out of the logs, with nothing glowing behind it. Browse virtual fireplaces to compare.

Against water vapor. A water vapor fireplace is the only one of the four whose flame physically takes up space, so it changes as you walk past it. A holographic flame is still a flat image placed in a clever spot. In exchange there is no water to refill and no transducer to wear out. See water vapor fireplaces.

Against LED. An LED flame effect is the standard electric flame, built from light rather than shown as an image, with no hidden screen or angled glass. Most of our electric fireplaces use it.

What every holographic fireplace has in common

  • A screen or projector you do not see directly. That is what separates the category from virtual.
  • Physical logs or media around the image, because the depth depends on them.
  • A flame that runs with or without heat, so you can use it year-round.
  • Supplemental electric heat for the room you are in, not the house.
  • No venting, gas line or chimney. They plug in or hardwire.
  • Indoor use. None of the holographic models we checked is rated for outdoor use.
  • Multicolor flame options on most models, which is standard across electric fireplaces and says nothing about quality.

Things to keep in mind

A holographic fireplace asks for more planning than any other electric fireplace. Get the details below right and the result looks remarkably real. Get one wrong and it will disappoint.

  • It is much deeper. Built-in models need a framed cavity about 20 inches deep, at least 5 inches more than any other electric fireplace of the same width that we carry. Plan the wall around it from the start.
  • Large models are heavy. The 75-inch model we carry weighs 392 pounds, more than any other electric fireplace its width that we carry, so plan the delivery, the framing and enough hands to set it.
  • Height decides whether it looks real. The flame is designed to be seen from a particular eye line. Set the height around where people actually sit, and follow the manufacturer's viewing guidance.
  • So does the light. It looks its best in a dim or evening room, with no direct sun on the glass.
  • It costs more. Holographic models sit near the top of the electric fireplace price range, so a poor placement is an expensive mistake.

When the height and the lighting are right, a holographic fireplace is stunning: the flame rises out of the logs the way a real fire does. When either one is off, it never looks the way you hoped, and that is a hard lesson at this price. If you are not sure about your wall, talk to us before you buy.

Where you sit decides how good it looks

A reflected flame looks right from some positions and less right from others, because the angled glass sends the image toward a particular eye line. Viewing from well off to the side weakens the effect for exactly this reason. Amantii publishes an "optimal flame picture zone" for the MultiView HOLO and recommends the base sit at least 18 inches above the floor. Its guidance says that if you view it from close up, you may be outside the zone, and raising the fireplace helps.

Kris Richardson, founder of Modern Flames, makes the same point in our interview with him: a holographic fireplace has to be installed at the right height and seen from the right spot, and from the side or up close it loses some of its realism. The discussion starts at 8:28.

In practice, plan the height around where people actually sit. A fireplace set low in front of a sofa a few feet away is the setup most likely to disappoint. A raised hearth or a media wall seen from across the room suits it well. Some manufacturers of projection models say theirs hold up better from an angle, which is worth seeing in person if your seating wraps around the fireplace.

It looks best in a dim room

Flamerite says its holographic flame is designed for low ambient light and that a bright room creates reflections that weaken it. Amantii tells installers to keep the screen out of direct sunlight from windows and doors. Both models we carry let you turn the flame brightness up, but neither is meant to compete with afternoon sun.

Think of it like a projector more than a TV. It looks its best in the evening, which is also when most people use a fireplace.

The heat comes from a separate electric heater

The flame makes no heat. Warmth comes from a heater built into the unit, and on the models whose manuals describe it, that heater blows warm air into the room. You can run the flame year-round with the heater off.

  • On a standard 120 volt circuit, the holographic models we checked put out around 1,500 watts, or about 5,000 BTU. As a rule of thumb that warms roughly 400 to 500 square feet.
  • On 240 volts, several offer a hardwired option that roughly doubles the output, enough for roughly 1,000 square feet.
  • Flame only, they draw far less. Amantii's manual puts its 55-inch model at about 100 watts with the heater off.

None is meant to be a primary heat source, and Flamerite's manual says so explicitly.

Most are built-in, but not all

Built-in holographic electric fireplace finished three-sided in a living room with a stone hearth
A built-in holographic fireplace finished three-sided. In photo: Flamerite E-Ridium Series Built-In Holographic Electric Fireplace.

The category comes in several formats, and each asks for something different.

  • Built-in linear fireplaces are the most common. They need a framed cavity about 20 inches deep, so they go into a feature wall, peninsula or bump-out, never a standard 2x4 or 2x6 wall. Many convert between single-sided, corner and three-sided by removing side panels at installation.
  • Inserts slide into an existing fireplace opening, replacing a masonry or gas unit.
  • Mantel packages and freestanding units need no framing at all.

That depth is the biggest practical difference from other electric fireplaces. Among the built-in linear models 50 to 80 inches wide that we carry, holographic units are 19 to 21 inches deep, while LED, virtual and water vapor models of the same width run about 4 to 15 inches.

Flame type Depth Weight
LED flame effect About 4 to 15 inches About 45 to 260 pounds
Virtual About 6 to 13 inches About 105 to 180 pounds
Water vapor About 10 to 12 inches About 60 to 240 pounds
Holographic About 19 to 21 inches About 145 to 390 pounds

Built-in linear models 50 to 80 inches wide that we carry. Weight rises with width.

Weight depends more on width than on flame type, with one exception worth knowing: the 75-inch Amantii MultiView HOLO, at 392 pounds, is heavier than any other fireplace of its width that we carry.

For a built-in, two details from the manuals are worth planning around. Flamerite requires a header over the opening so the fireplace never carries the weight of the finished wall. Both Amantii and Flamerite say to run the fireplace before the wall is finished. Our built-in electric fireplace installation guide walks through framing and finishing step by step.

Hardwire a built-in, and plan on an electrician

A mantel package or freestanding unit usually plugs into a standard outlet. For a built-in, we recommend hardwiring. Most can plug into an outlet inside the wall, but once the wall is finished that plug is out of reach. Hardwiring and any dedicated circuit are a job for a licensed electrician, and a 240 volt option is hardwired anyway. Flamerite's manual says installation should be done by qualified personnel.

Large built-ins are also heavy. Amantii's 75-inch MultiView HOLO weighs 392 pounds, and Amantii recommends three people to lift out its angled glass when the logs are first placed.

Which specifications matter, and which do not

Worth comparing:

  • How the image is made. Reflection or projection, and whether the manufacturer publishes viewing guidance.
  • Filmed fire or animation. Filmed footage moves the way real fire does.
  • The log set and lighting. Lit logs, ember bed and downlights do most of the work of selling the depth.
  • Format and depth. Built-in, insert or freestanding, and the cavity it needs.
  • A 240 volt option, if you want more heat than a standard circuit allows.

Not worth weighing:

  • Heat output on 120 volts. The models we checked all sit close to 5,000 BTU.
  • The number of flame colors. Nearly every electric fireplace offers multicolor flames.
  • "First" and "only" claims. Some manufacturers call theirs the first or the only holographic fireplace. Judge the flame, not the label.

The display is the part to ask about

A holographic fireplace is a display behind glass, so ask how that display is serviced. Flamerite rates the E-Ridium's LCD at 100,000 hours and says it is not meant to be replaced by the owner. Amantii lists the MultiView HOLO's screens as replacement parts. On projection models with a coated screen, manufacturers warn to clean it only with a soft, dry cloth, because cleaners or a damp cloth can damage the coating. Warranties among the manufacturers we checked run one to two years, so read the terms before you buy. For more peace of mind, both holographic models we carry are eligible for an Extend protection plan of one, two or three years, which starts when the manufacturer's warranty ends.

Two holographic fireplaces we carry

Holographic electric fireplace built into a navy feature wall below a TV
In photo: Amantii Signature MultiView HOLO 3-Sided Built-In Holographic Electric Fireplace.

Both are built-in reflection models that convert between single-sided, corner and three-sided.

  • Amantii Signature MultiView HOLO: five flame patterns with smoke and spark effects, lit logs, a Bluetooth speaker, Wi-Fi app control, and a hardwired 240 volt option for double the heat.
  • Flamerite E-Ridium Series: glowing LED logs, adjustable flame brightness, a 1,500 watt heater, and a simpler control set of remote and keypad.

Who should buy one, and who should skip it

A good fit if:

  • You want a flame that looks like it rises out of the logs, not one playing on a screen.
  • The room is used mostly in the evening.
  • The seating is across the room, or the fireplace can sit raised.
  • You are building a feature wall, or you want an insert or mantel package that suits one of the other formats.

Skip it if the room gets direct sun on the fireplace, or the main seat is low and close. Choose water vapor if you want a flame with real depth you can walk around, or a virtual fireplace if you want filmed fire on a screen in a shallower wall.

Where to go next

Every holographic model we carry is in our holographic fireplaces collection. To compare them with water vapor and virtual models, see our most realistic electric fireplaces. If you are not sure the height, light or framing will work in your room, send us a photo of the wall and we will tell you.

Frequently Asked Questions

Is a holographic fireplace a real hologram?

No. The flame is a moving image, usually from a hidden screen reflected in angled glass, sometimes projected onto the logs or a coated screen. Many use the stage illusion called Pepper's ghost. "Holographic" is the name manufacturers use for a flame that looks like it rises out of the logs, not a laser hologram.

What is the difference between a holographic and a virtual fireplace?

Where the screen is. A virtual fireplace puts the screen behind the logs and you look straight at it. A holographic fireplace hides the screen and shows you its reflection or projection, so the flame looks like it rises out of the logs, with no screen behind it. Many of both play footage of real fire.

Does a holographic fireplace give off heat?

Yes, from a separate electric heater, not from the flame. On a standard 120 volt circuit most put out about 5,000 BTU, enough to warm roughly 400 to 500 square feet, and several offer a hardwired 240 volt option that roughly doubles it. The flame also runs with the heater off.

How high should a holographic fireplace be installed?

High enough that the flame is in your line of sight from where you sit. Reflection models are tuned to a particular eye line, so a low fireplace seen from nearby looks least convincing. Amantii, for example, recommends the base of its MultiView HOLO sit at least 18 inches above the floor.

Can a holographic fireplace go in a 2x4 or 2x6 wall?

Not as a built-in. Built-in holographic fireplaces need a framed cavity about 20 inches deep, deeper than most other electric fireplaces, and we recommend hardwiring them. If you cannot build that out, look at the formats that need no cavity: inserts for an existing fireplace opening, mantel packages, or a freestanding model.

Which looks more three-dimensional, holographic or water vapor?

Water vapor. Its flame is real mist, lit from below, that physically fills the firebox, so it changes as you move around it. A holographic flame is a flat image placed in the firebox, which looks deep from the right seat. It needs no water, and like water vapor it looks best in a dim room.

Anastasia Vankova

Anastasia Vankova

Founder of Modern Blaze

Anastasia has been helping homeowners and trade professionals choose the right fireplace since 2014. With deep expertise in electric, water vapor, ethanol, gas fireplaces, and patio heating, she simplifies complex specs into clear, trustworthy guidance. She also creates educational content for the Modern Blaze YouTube channel.

Contact Modern Blaze Fireplace Experts

Our experts at Modern Blaze are ready to assist you in selecting the right model for your needs, checking specifications, and ensuring compliance.

Email: support@modernblaze.com

Call / Text: 866-713-2399

Want to save on your fireplace purchase? Click here to get on our email list!

Leave a comment

Please note: comments must be approved before they are published.