Ceiling Mounted Gas Patio Heaters

A ceiling mounted gas heater hangs from an overhead structure and radiates infrared energy straight down, covering a seating group from above while leaving the floor completely clear. This collection spans natural gas and propane models for covered patios, pergolas, restaurant terraces and other sites where a beam or joist is available to hang from.

Authorized Dealer • Full Warranties • Free US Shipping

How a Ceiling Mounted Gas Heater Works

A ceiling mounted gas heater hangs from an overhead structure and aims its infrared energy straight down, so the heat lands on the people and surfaces below rather than on the air around them. Overhead is the most efficient place to put a patio heater: it clears the floor entirely, covers a seating group from above rather than from one side, and puts the heat source well out of reach. Where a covered patio, pergola or awning already exists, this is usually the right format.

What you need overhead

These need a real structure to hang from and specified clearance above and to the sides, because a gas heater produces exhaust and needs open air to burn. A solid beam, a rated joist or a purpose-built mounting kit will do; a fabric awning generally will not. A gas heater must never be recessed into a soffit or ceiling cavity, unlike flush-mounted electric models. That is a combustion requirement rather than a manufacturer preference.

Mounting height decides the coverage

Every model specifies a height range its heat pattern is designed around, and the right choice is usually constrained by your ceiling before anything else. Mounted below the range, the heat directly underneath is uncomfortable and the covered area shrinks. Above it, the pattern spreads thin. Where one heater cannot cover the area from the height available, two overlapping units beat one mounted higher.

Natural gas or propane

Natural gas plumbs into a fixed line and never needs refilling, which suits a permanent overhead installation where reaching a cylinder would be awkward. Propane runs from a tank, which is workable overhead but means someone has to get to it. For a ceiling mount specifically, a gas line is worth the installation cost more often than it is at ground level.

Where to look next

Wall mounted gas patio heaters suit a spot with a wall but no usable overhead structure. Ceiling mounted electric heaters need a circuit rather than a gas line and can be flush recessed into a soffit. Radiant tube heaters are the long overhead burners for warehouses, shops and large covered areas. Gas Patio Heaters is the full gas range.

Frequently Asked Questions about Ceiling Mounted Gas Patio Heaters

What do I need overhead to mount a gas patio heater?

A solid structure rated to carry the weight, plus the clearance the model specifies above and to the sides. A beam, a rated joist or a purpose-built mounting kit all work. A fabric awning generally does not, both because of the load and because a gas heater needs specified distance from anything combustible. Check the weight and clearance figures on the product page against what you are fixing to.

Can a gas patio heater be recessed into a soffit?

No. A gas heater burns fuel, so it needs open air to draw combustion air and clear its exhaust, and it requires clearance to combustible surfaces. Recessing one into a soffit or ceiling cavity is a fire risk. Flush recessing is an electric-only option, and it is the clearest practical reason to choose electric when a fully concealed look matters.

How high should a ceiling mounted gas heater be installed?

Follow the range on the model rather than the ceiling you happen to have. Mounted too low the heat directly beneath is uncomfortable and the covered area shrinks; too high and the pattern thins out before it reaches anyone. Your available height will usually narrow the model choice before output does, so measure first and shortlist second.