Effective and Efficient Heating With a Patio Heater That Boasts Superior Wind Resistance
Patio Heaters are often advertised to have extra heat or consume energy efficiently, but these features don't make a heater reliable on windy days.
Especially, with Gas Heat. You waste energy when all its warmth is just blown away by the wind.
SunStar Glass Infrared Gas Heaters offer a solution to heat effectively and efficiently. It is designed with a Black Glass Face for superior wind resistance against winds up to 40 mph. Exceptionally sturdy, it can withstand even direct rain or snow. Combine consistent heat and a strong build, and you get a reliable heater.
Made in the USA by Gas Fired Products, you buy from a reputable, leading manufacturer of heaters. Since 1949, they only work with quality components.
This heater uses Infrared Heat to warm people directly, instead of heating the air. Under winds less than 15 mph, it covers a 12 x 12 ft area with 35,000 BTUs. The Black Powder Coated model matches any decor, and the Marine Grade Stainless Steel ensures it will never rust, even in coastal areas.
This model is designed to be fixed and ceiling-mounted at 0° to heat a wider coverage area than angled units. It comes with a mounting kit and a wall switch. Even more convenient, there's also a remote-controlled unit.
Have a wonderful time relaxing or dining outside, feeling fewer chills from the wind. Order here with free shipping!
See this unit for angled mounting, which may allow you to position the heater better.
What's Included: Gas Infrared Heater, Mounting Kit, Switch Kit, Heat Shield, Remote Control (For Remote Controlled Units Only), and User's Manual
Optional Accessories: Switch Kit With Timer, Relay Kit, Gas Connector, Gas Connection Kit, and Gas Regulator
Need help determining the right heater and setup for your space and heating needs? Give us a call at (866) 713-2399 or email us at support@modernblaze.com and we'll be happy to help!
FEATURES:
- High-Intensity Gas Infrared Heater, great for Indoor/Outdoor Use in Commercial Spaces and Outdoors Only in Residential Areas
- Choose a convenient gas type- Natural Gas or Liquid Propane
- Choose between 2 types of material to suit your needs:
- Aluminized Steel with Black Powder Coat matches any decor
- Marine Grade (316) Stainless Steel has extreme corrosion resistance in harsh environments like coastal areas.
- Fixed 0° Horizontal Mounting heats a wider coverage area
- Infrared Heat warms people/objects directly, more effective than heating the air.
- Direct Spark Ignition to easily turn it on in seconds
- Two-Stage Heat allows you to save gas and provides better comfort
- Includes the mounting kit to properly install it on the ceiling
- Remote Controlled Units are available to more conveniently access the settings
- Includes the switch kit to easily turn it on/off or set it on high/low
- Comes with a Heat Shield to reduce clearances above the heater
- Must be connected to a properly grounded electrical source
- 24,000 BTUs (Low), 35,000 BTUs (High)
- 120 VAC, 60 Hz
- 11.8" H x 48" L x 9.6" W
- 55 lbs
- CSA Certified
- 3-Year Limited Warranty on Burner Assembly
- 1-Year Limited Warranty on Controls
What's in the Box:
- Gas Infrared Heater - 1 pc.
- Heat Shield - 1 pc.
- Mounting Kit - 1 set
- Switch Kit - 1 set
- Remote Control (For Remote Controlled Units Only) - 1 pc.
- User's Manual - 1 pc.
DOWNLOADS:
Recommendations:
This heating guide has helpful tips on setting up heaters on your patio.
WARNING: Installation of this heater must conform with local building codes or, in the absence of local codes, with the National Fuel Gas Code, ANSI Z223.1/NFPA 54, or the Natural Gas and Propane Installation Code, CSA B149.1 In Canada, the installation must conform to current CSA B149.1 (The Natural Gas and Propane Installation Code) in the absence of local codes. Heaters shall be installed by a licensed contractor or licensed installer. Clearances to combustibles as outlined in the manual should always be observed. In areas used for storage of combustible materials where they may be stacked below the heater, NFPA54 requires that the installer must post signs that will “specify the maximum permissible stacking height to maintain the required clearances from the heater to combustibles.”
SunStar Heating Products Inc., the manufacturer, warrants to the original owner of any Sunstar infrared gas heater that said heater will be free from defects in material or workmanship under normal use and service. The heater(s) shall be installed, used and maintained strictly in accordance with the manufacturer's instructions. The manufacturer's sole obligation under this warranty shall be limited to furnishing replacement parts, F.O.B. Charlotte, NC, for 12 months from the date of installation, or 18 months from the date of shipment by the manufacturer, whichever period shall expire first.
Labor charges for removal of defective parts and the installation of the replacement parts are not included. This warranty applies only within the USA and Canada
Click Here to See the Full Warranty
